Stop pigeons from turning your solar panels into a nesting site.
Arizona solar panels create the perfect shaded shelter for birds and rodents. ReGrid installs a clean, no-drill mesh barrier around your array to help keep pests out, protect your wiring, and preserve the look of your system.
We'll confirm your panel count, look up your property, answer your questions, and give you the next best step.
You are not committing to an install. The call is simply to see whether bird guard makes sense for your home and what it would cost.
Arizona solar panels create the perfect shaded shelter for birds and rodents. ReGrid installs a clean, no-drill mesh barrier around your array to help keep pests out, protect your wiring, and preserve the look of your system.
- Every install includes a free full solar system inspection
- No drilling into your roof or panels
- Built for Arizona heat, sun, and monsoon conditions
- Blocks pigeons, rodents, nesting, and debris
- Installed by a licensed and insured solar install network
- Designed to blend in with your existing solar array
By the time you see the mess, the birds have usually been there a while.
Most homeowners do not climb on the roof to check under their solar panels. Birds know that. The space under your panels is shaded, protected, and hard to reach, which makes it an ideal place for nesting.
At first, it may just look like a few birds sitting near the roofline. Then droppings start baking onto the panels. Nesting material builds up under the array. Debris blocks drainage paths. Rodents can move in. Wiring can be exposed to chewing, heat, and nesting material.
And because the problem is happening under the panels, it is easy to ignore until it turns into a cleanup, repair, or production issue.
Droppings on panels
Bird droppings and debris can reduce the clean surface area your panels need to produce efficiently.
Nesting under the array
Twigs, feathers, and packed nesting material can collect beneath the panels where homeowners cannot easily see it.
Chewed or exposed wiring
Rodents under the array can create electrical risks that are more expensive to fix later.
Roof and cleanup headaches
Once the mess builds up, professional removal, cleaning, and repair can cost far more than prevention.
You already invested in solar to lower your bills and protect your home. Bird guard helps protect that investment before pests turn it into a bigger problem.
A clean perimeter seal for your solar array, without drilling into your panels or roof.
ReGrid installs a durable, coated steel mesh around the open perimeter of your solar array. The mesh is secured with specialized clips that attach to the panel frame, so there are no screws into your roof and no drilling through your panels.
It does not cover the face of the panels. It does not block sunlight. It simply closes off the access points birds and rodents use to get underneath.
Inspection and prep
Our crew checks the array, identifies existing nesting or debris, and prepares the perimeter for installation.
No-drill mesh installation
A black, low-profile mesh barrier is clipped around the array to block access points while preserving airflow and appearance.
Cleanup and photo documentation
You get a cleaner, protected array and a crew that treats your roof like the solar investment it is.
Long-term protection
Once the perimeter is sealed, there are no moving parts and no recurring maintenance routine to manage.
Find out what your home needs, what it costs, and how soon it can be installed.
A free call that gives you the answer you actually need.
This is not a high-pressure solar sales appointment. You already have solar. The call is simply to figure out whether your system needs bird guard, what your options are, and what it would take to protect it.
Tell us where the system is
We confirm your address, panel count, roof type, and what you have noticed around the home.
We size the job
If needed, we use photos, satellite view, or basic system details to estimate the array perimeter and confirm the right approach.
You get a clear quote
You will know the price, the process, the timing, and whether anything else should be checked before install.
You decide
No obligation. If it makes sense, we get you on the schedule. If it does not, you still leave with a clear answer.
Solar work should be done by people who understand solar systems, not just pest control.
Bird guard touches your solar array, your roof, your wiring, and your warranty concerns. That is why the installer matters.
ReGrid works through a trained, licensed, and manufacturer-aligned solar install network, with experience across thousands of projects, multiple Arizona cities, and installer relationships with major solar equipment brands.
Real Arizona roof photos
See actual examples of nesting, droppings, packed debris, and wiring damage found under solar arrays.
Solar-specialized crews
Bird guard is installed by people who understand panel frames, wiring, roof access, and solar system care.
No-drill installation method
The mesh attaches with clips to the panel frame. No screws into the roof. No drilling through the panels.
5-star homeowner reputation
ReGrid's site currently shows a 5.0 Google rating from 27 reviews.
Local Arizona presence
Tempe office. Arizona service area. Crews familiar with Arizona heat, tile roofs, and solar-heavy neighborhoods.
Photo-documented every job
You get before and after photos of the perimeter so you can see exactly what was cleaned, sealed, and protected.
The short list.
Will bird guard damage my roof or panels?+
No. The mesh is attached with specialized clips to the solar panel frame. There is no drilling into the roof and no drilling into the panel surface.
Will it reduce solar production?+
No. The mesh goes around the perimeter of the array, not over the face of the panels, so sunlight still reaches the glass.
Do I need to know my panel count?+
No. You can choose 'I'm not sure' when you book. We can usually help confirm the panel count during the quote process.
What if birds are already nesting under my panels?+
ReGrid can inspect, remove existing nesting material, clean the affected area, and install the barrier so the same access points are blocked going forward.
How long does installation take?+
A standard residential array can often be completed in about half a day, depending on roof access, panel count, and current site conditions.
Do I have to be home?+
In many cases, you do not need to be home as long as the crew has safe roof and gate access. That can be confirmed on your call.
Is this a sales call?+
No. The goal is to confirm whether bird guard makes sense for your system, answer your questions, and give you clear pricing.
Book the free call before a small bird problem becomes an expensive roof problem.
You do not need to guess what is happening under your panels. In one short call, ReGrid can help you understand whether your array is at risk, what bird guard would cost, and how quickly your system can be protected. The smartest decision today is not committing to an install. It is getting the answer.
Or call (623) 628-4854
Spend 10 minutes now. Know whether your solar array is protected before the next nesting season, monsoon storm, or surprise roof repair.
Trained, certified, and authorized on the equipment your system runs on.
ReGrid Energy Solutions ensures all work is performed by qualified, licensed, and manufacturer-aligned installation teams.
5 stars from homeowners and roofers
Rated 5.0 from 27 Google reviews
“Great company to partner with! They handled a solar detach and reset for us during an HVAC and roofing job for our customer. They were fast, professional, and made the whole project effortless for us. Will absolutely work with them again on other projects.”
“I was so stressed trying to find someone who could reset my solar while I was getting my roof replaced and ReGrid made the process SO easy and hands off for me. Couldn't recommend more! 10 stars! Thank you so much!”
“ReGrid Energy Solutions exceeded my expectations from start to finish. The team was professional, responsive, and transparent throughout the entire process. They took the time to answer all of my questions, kept me informed every step of the way, and delivered exactly what they promised. Their attention to detail and customer service truly set them apart. I highly recommend.”
“Over 30 years in the real estate industry i have found inspections are crucial. I started having ReGrid inspect solar systems making sure that they are operating and performing properly. Most buyers do not have experience reading solar electric bills and the only way you can determine performance is calling an expert.”
“Great price, great service, and easy process. Highly recommend!”
“I can't say enough about ReGrid. We have had rooftop solar panels for sixteen years, whole-home batteries for four years and a water heater on the roof since 1985. When it finally became necessary to replace our roof, I was pleasantly suprised to find one company who would coordinate with our roofing contractor to handle the disconnection, removal and reinstallation of all of our solar equipment, regardless of the manufacturer. ReGrid's project coordination was absolutely seamless. The photovoltaic panels were removed on Thursday, the water heater was removed on Friday, the tear-off and partial reshingle of the roof was completed on Saturday and the water heater was reinstalled on Sunday. We actually had running hot water again by 6:00 PM Sunday evening. The batteries and rails were reconnected and the photovoltaic panels were reinstalled and recommissioned only two days later -- once the rest of the roof was completed. It was an amazing ballet of contractors, engineers, technicians and managers all working together to complete a very complicated project in record time. I can highly recommend ReGrid if you want to simplify your life. They are the supreme solution to any solar roofing project.”